#######################
Board assembly
#######################
All board design files and BOM are in |github| under an open source license. Assemblying the board is 
straightforward - all you need is a decent sodlering iron - but time-consuming (you need to solder 80 pins). 

The Neopixel LEDs are soldered from the bottom of the board; pay attention to orientation 
(one of LED contacts has a corner cut off):

.. figure:: images/neopixel.jpg
    :alt: Main view
    :width: 60%


Before soldering the TFT display, 3d print the support (in harware/3d printed folder in github) 
and glue it to the  display (I used contact adhesive for plastics). Be careful with the display, 
they are fragile.

.. figure:: images/front.jpg
    :alt: Main view
    :width: 60%



After soldering all components, use flush cutters to trim the pins of the TFT display and the switch protruding 
from the bottom of the board.  

.. figure:: images/bottom.jpg
    :alt: Main view
    :width: 60%